Best price to quality ratio - delivered
50703 Production line W type cantilevers
Roll forming line for the production of profiles for cantilever racking shelves, intended for storing long profiles. These structures are alternatives to pallet racking, for longer profiles. Cantilever racking can be single-sided if picking is possible on one side only, and is usually positioned close to the walls; they are two-sided if picking is possible on 2 sides, with handling elements between the different aisles.
Technical data
| Material thickness | 2 - 5 mm |
|---|---|
| Line speed | 6 m/min |
| Line direction | right to left |
Machine configuration
It is a motorized decoiler (or idle on request) with the capacity of 5 tons. Complete with hydraulic power pack and independent electric plant. Hydraulic unit for the spindle regulation, an electric plant for the automatic / manual mode and for the speed regulation. Complete with loop, arm for the loop control, and spokes to maintain the strip in the correct position.
Technical data
| Decoiler capacity | 5 | ton |
|---|---|---|
| Shaft diameter (min/max) | 470/530 | mm |
| Coils maximum external diameter | 1800 | mm |
| Motorized AC decoiler with inverter | 4 | kW |
It is positioned in the initial part of the line and it is essential for the correct introduction of the sheet and to maintain the correct position during working. It is made up of a metal structure and adjustable guide rolls.
The feeder consist of a racket made of welded structure fixed to the press on which there are two steel shoulders for driving the towing rolls. Inside the welded structure there is the Brushless motor that drives the towing rolls with a couple of pulley with cogged belt (high resistance).
Technical data
| Useful width | 600 | mm |
|---|---|---|
| Working height | 1000 | mm |
It is the mechanical punching press complete with dies. These dies are tailor-made based on the customer's requests and are made of the most suitable material to perform the pre-cutting (s). Their function makes them particularly important for the final result, and it is precisely for this reason that PM follows their entire development with particular precision.
Roll forming line of high quality, productivity and flexibility. It is characterized by the rapid change of cassettes (it is possible to change the product in a few hours) and materials and finishing rigorously controlled to guarantee for the client more production and less maintenance. It could be completed with sheet lubrication plant, strip introducer and independent regulations for each forming station.
Technical data
| Roll forming line shaft Ø | 100 | mm |
|---|---|---|
| Useful width roll forming line | 700 | mm |
| Passages of roll forming line | 16 | n° |
| Material thickness | 2 to 5 | mm |
The whole electric installation is intended here. Electric cabinet, cable channels, control desk and software for the management of the line parameters, all according to the highest standards of quality and efficiency.
L'impianto idraulico è necessario nelle operazioni di taglio e nelle unità idrauliche di punzonatura o scantonatura. È composto dalla centralina (di potenza tale da soddisfare tutte le lavorazioni), dai collegamenti meccanici (tubature e valvole) e dal software di controllo e gestione.
Series of wire mesh, infrared photocells and sensors for the protection of the operators. They are installed on the line to avoid any accident that could cause physical damages to the operators