UZ12 ULTRALIGHT creates welding-ready bevels on linear plates of any shearable material, including iron, steel (up to 60kg/mm2 or 85,000lbs/in²), stainless steel, brass, copper and aluminum. It cuts bevels from 3 to 35mm in thickness, with a minimum plate width of 60 mm and minimum plate length of 60mm.
The Beveling of the tubes from ID 95mm.
Incredibly silent running of the machine.
The beveling angle adjustable by the help of the kit for needed angle. Available are kits for 30; 45; 37,5; 22,5 and 50 degrees.
The pressure bar unit and the piece supporting unit can be adjusted in height and are supplied with visible graduated scale.
It can be hooked to the piece to be machined in either a horizontal or vertical position. The machine can be inverted in order to bevel the bottom side of the plate. Both X and K bevels are possible.
The total weight of the machine is very low and only one person is necessary for operation of our UZ12 Ultralight
Inversion allows for creation of a double-sided bevel – no need to rotate or flip heavy material
Functions as a stationary or a moveable station

TECHNICAL DATA

Working range max.bevel	12mm
Bevel angle	30°; 45°; 22,5°; 37,5°; 50°( exchangeable angle kit) other angles on demand
Thickness shearable materials	from 3 to 35mm
Engine	400W
Speed of feeding	1,8m/min
Machine weight	30kg
Dimensions	470 x 294 x 523mm